Click to expand.I also have a MBP-R and also had a USB-3 Hub from D-Link which I returned. However, I just found out that it was the way I connected it that was wrong (I have a new USB 3 Hub, but I know it was the way I connected because this one did the same thing UNTIL I READ THE APPLE FAQ: I found out that the FIRST device one plugs in to an external USB port CONFIGURES the external USB bus. Be sure that after powering up the computer, you plug in the USB 3 Hub to an external port FIRST. After that, you can plug things in and they will be recognized correctly. I verified this for my installation using the System Information page and looking at the USB window.
In contrast to the company’s Yeti, our pick for best all-in-one USB microphone, the Icicle is a basic audio interface that has an XLR input on one end for plugging in microphones, and a USB output on the other end to connect to a computer. It’s best thought of as an adapter to turn any XLR mic into a USB mic. This guide covers basic troubleshooting steps to determine whether your USB MIDI device is recognized, and working properly on a Mac computer. If your device is not listed or grayed out you may want to try a different USB cable and or USB port.
So plug in the USB 3 hub first. Then you can plug things into the hub (USB-3 or USB-2) and they should go to the correct bus when you look at the USB config. Hope this is of some assistance.
For some time now I've been looking for a USB hub with 3.0 connectivity to accompany the iMac (since it now features USB 3.0). So far I haven't really found anything that 'fits' quite right. In part, I suppose it's an issue of appearance: there are very few hubs that actually match the look of an iMac. And those that do often have other issues, for example, which looks the part, but obviously isn't USB 3, has a short little cord soldered in, and is bus-powered (which is nice, but external power is really needed is you plan to use your hub for anything more than plugging in thumb-drives).
So has anyone had any luck finding an USB hub for the new iMac that meets the following requirements:. USB 3.0. has at least 4 accessible ports.
uses external power. isn't hideous (doesn't have to match the iMac, but no super-bright blue LEDs).
has decent performance reviews (some hubs I've seen look fine, but are reported to present a lot of problems in use) Any leads? I recently purchased a Belkin Superspeed USB 3.0 4-Port Hub and it's not USB 3.0 compatible with the brand new 27' iMac Great looking unit, probably best looking unit out there but its only recognized as a USB 2.0 right now. I'm going to keep it because I got it on boxing day for less than half its price so its not worth my hassel of returning.
I mounted it under my desk flush with the front of the desk, so sleek and clutter free. Ill just wait for USB 3.0 to be compatible with the iMacs. Product page. I recently purchased a Belkin Superspeed USB 3.0 4-Port Hub and it's not USB 3.0 compatible with the brand new 27' iMac Great looking unit, probably best looking unit out there but its only recognized as a USB 2.0 right now.
I'm going to keep it because I got it on boxing day for less than half its price so its not worth my hassel of returning. I mounted it under my desk flush with the front of the desk, so sleek and clutter free. Ill just wait for USB 3.0 to be compatible with the iMacs. Product page. Hey everyone!
After an excruciatingly long search for a USB 3.0 hub working at USB 3 speeds for my USB 3-capable 15' MacBook Pro w/ Retina Display, I finally ordered this one from Amazon: Besides the fact that it has seven USB 3.0 ports, it also has an extra strong (10W output!) 'charging port' for anyone with an iPad 3 or 4, which takes a LOT longer to charge on a regular USB port. The power supply also seems to be adequate considering it has to potentially power 7 USB 3.0 devices, plus any device you might have on the charging port. Then there is the 18-month warranty that the newly renamed company (Anker) gives with purchase. This baby JUST became available again, so it's a brand new revision of the product, which is evidenced by the new company name on the product itself. It also no longer states that Mac users need not apply, but instead notes that anyone still running OS X 10.7 upgrade to Mountain Lion (10.8.2 or later). I'll do some benchmarks and write a review when I get it.
For now, I shall enjoy the anticipation of its delivery.;-). I recently purchased a Belkin Superspeed USB 3.0 4-Port Hub and it's not USB 3.0 compatible with the brand new 27' iMac Great looking unit, probably best looking unit out there but its only recognized as a USB 2.0 right now. I'm going to keep it because I got it on boxing day for less than half its price so its not worth my hassel of returning. I mounted it under my desk flush with the front of the desk, so sleek and clutter free. Ill just wait for USB 3.0 to be compatible with the iMacs. Product page.
I have been looking for a 7 Port USB Hub for my new IMAC 27' /3.4 i7/ 680 MX/ 32G/ 768 SSD/ I found TWO 7 Port that seams to have been upgraded. They both use the new VIA VL812 Chipset and say that they are compatible with Mac. Check these out and let me know what you think: Anker® Uspeed USB 3.0 7 Port Hub + 1 Charging Port AMAZON 4 1/2 Stars with 123 customer reviews Anker® Uspeed USB 3.0 model Anker® Uspeed USB 3.0 7 Port Hub + 1 Charging Port has the new VIA VL812 Chipset and is the only one, including the 4 port models, that tells about the update.
System Requirements Windows XP / Vista / 7 / 8, Mac OS X. Mac OS X Lion 10.7.4 users may experience unstable connections due to microchip incompatibility.
Where possible, we recommend upgrading your OS X to Mountain Lion 10.8.2 or later. If you encounter other performance concerns, please contact our customer support with your operating system information. We can then provide guidance on how to upgrade your hub's microchip firmware. The charging port (5V 2A) is designed for charging your mobile devices only and will not support data transfers. 2.4 GHz wireless devices, such as wireless keyboards and mouse adapters, may not work in close proximity to USB 3.0 devices or hubs. Connecting to a USB 2.0 port is recommended.
For maximum performance, connected devices should not exceed a combined current of 7A. Otherwise, output current may become unstable or disconnect entirely. Some USB 3.0 devices require a direct connection to host USB 3.0 ports, including some USB 3.0 hard disks. Please note that Apple now provides an official update for MacBook Air and MacBook Pro computers purchased in June 2012.
This update improves USB 3.0 performance and compatibility and can be downloaded from the official Apple website as 'MacBook Air and MacBook Pro Update 2.0.' Please contact our support team if you cannot locate this update.